SECO Energy Embarks on Solar and Battery Energy Storage Pilot Project

SECO Energy Embarks on Solar and Battery Energy Storage Pilot Project

SECO Energy’s Engineering department recently embarked on a solar and battery energy storage pilot project. The cooperative contracted local solar array vendor Solar Trek to construct a 6,000-watt solar array and battery storage system at the Sumterville substation at its headquarters location. The project was designed and constructed over a nine-month period this year.

 

The new 6,000-watt solar array is ground mounted near Highway 470 to offset the utility-supplied power needed to serve the load in the switchgear enclosure. The energy storage batteries are housed in a cabinet outside of the substation switchgear. On average, the solar panels will produce 25 kilowatt hours (kWh) per day or about 750 kWh per month. Each panel is connected to a micro inverter that maximizes efficiency by converting DC to AC power at the panel. The battery storage is configured for charge by the solar system. This stored energy is released onto SECO’s electric system twice per day, in the morning before 9 a.m. and in the evening before 6 p.m.

 

Solar systems produce energy from the sun in the form of direct current (DC). To convert DC power to alternating current (AC) that is usable in homes and businesses, inverters are installed on each solar panel. The pilot project offers a variety of data for SECO’s Engineering staff to collect and study. SECO will measure the amount of AC power produced by the panels and the amount of energy the battery inverters will use to convert AC to DC then back to AC voltage. Also, SECO will assess the amount of energy required to charge the batteries and how much energy the battery inverter uses to convert DC to AC voltage. In its first month of operation, the system has produced 700 kWh of energy and approximately 300 kWh has flowed back into the grid.

 

CEO Jim Duncan stated, “The goal of the pilot project is to learn more about solar arrays and battery storage systems. This knowledge will better prepare SECO employees who assist members interested in solar investments at their homes or businesses. Ultimately, we will monitor the data collected to compare the costs and benefits of energy storage and determine if the efficiency of the project will lead to SECO investing in future large-scale solar enterprises.”

 

SECO Energy is an advocate for members who decide to invest in a member-owned solar array and want to interconnect with SECO’s electric facilities. The not-for-profit cooperative has devoted a section of its website to helping members understand their solar investment prior to committing to a project. Visit our Solar Power page for an overview of solar panels, inverters and net metering. Members can also use the Solar Estimator to determine the potential reduction in utility-supplied power they may expect after installing a solar system.

 

“Like” SECO’s Facebook page and “follow” @SECOEnergy on Twitter for news releases and cooperative updates.

Leave a Reply